Best Portable Full Motion TV Mount for RV Life

The best portable full motion TV mount for most RV and camper setups is the Mount-It! MI-429, because it ships with dual wall plates and a quick-release bracket that lets one TV move between an indoor and an outdoor spot in seconds, with a 15.3-inch arm extension and a toothed locking joint rated for screens from 19 to 43 inches at up to 33 lbs. If your TV lives on one wall and never moves, the USX MOUNT XMM006-1 is the better buy: it handles 26 to 65 in screens up to 77 lbs and costs the least in this set.

Best portable full motion TV mount at a glance

How I screened these seven mounts

Amazon's search for portable full motion TV mounts returns thousands of listings, and the word "portable" is doing a lot of work in that query. It only sometimes means "the whole assembly comes off the wall". More often it means "the mount is small, moves in three axes and is intended for a camper or a tight room". I built this shortlist around the second reading, because that is what buyers actually receive when they click a listing tagged with the phrase.

The picks map to buyer profiles rather than to a single spec sheet:

1. Two dedicated RV mounts with lockable arms for road use.
2. Two compact wall mounts sized for 13 to 43 in screens in small spaces.
3. One pole clamp for van and cabin builds.
4. One budget mount for a stationary 55 to 65 in TV.
5. One heavy-duty mount for a large screen on a stud wall.

Any listing that did not publish either a VESA range or a TV weight limit was cut, because those are the two numbers you cannot guess at. Feature bullets on Amazon are the manufacturer's copy, not verified figures, so where I quote a swivel angle or an extension I say who claims it.

What actually makes a mount portable?

Most guides to a "best portable full motion TV mount" compare arm extension and swivel angle. Those matter, but they are not what makes a mount portable. Two other things do.

The first is the wall-plate system. A truly portable mount ships with two wall plates and a quick-release bracket on the back of the TV. You bolt one plate inside and one plate outside, mount the TV to whichever plate you want, and swap. Only the Mount-It! MI-429 in this set is designed that way from the box.

The second is weight. A 3.88 lb assembly like the Perlegear PGLRVF2 is a mount you can move one-handed and reinstall on a second wall in a weekend. A 5.07 lb wall mount for 65 in screens like the USX XMM006-1 is not going anywhere once the stud bolts are in, and neither is anything sized for a 75 in TV.

Full motion is the third pillar, and every pick here has it: tilt, swivel and, in most cases, an extending arm. But full motion is the easy part. Portability is the hard part, and it is a design choice, not a spec.

1. Mount-It! MI-429 — Best overall

The only mount in this set that ships with two wall plates and a quick-release bracket, so one TV can serve an indoor lounge and an outdoor awning without buying a second bracket.

Best for: RV owners who want to watch inside and outside from the same TV. Skip it if: your screen is over 43 in or heavier than 33 lbs.

This is the pick that earns the word "portable" in the keyword. Mount-It! includes a second wall plate in the box, and the TV bracket detaches with a quick-release, so the same 19 to 43 in screen can live in the living area during the drive and hang under the awning at the campsite. The arm folds to a 2.3 x 9.7 x 8.1 in footprint and extends 15.3 in, with Mount-It! claiming +5°/-15° tilt and ±90° swivel. The frame is rust-resistant aluminium, which matters for the outdoor plate.

The differentiator inside this set is the toothed locking joint. Mount-It! designed it so each articulation point clicks into a fixed position, rather than relying on friction alone, which is what stops a mount rattling on a rough road. Against the two pull-cord RV mounts here, that is a mechanical lock at every joint rather than a single lock at the base.

The trade-off is capacity. Cap out at 43 in and 33 lbs, and this mount costs more than any other 13 to 43 in option in the set. You are paying for the second plate.

Pros:

• Only pick with dual wall plates and quick-release bracket
• Toothed locking joint at every articulation
• Rust-resistant aluminium frame
• 15.3 in arm extension published
• Compact 2.3 x 9.7 x 8.1 in folded footprint

Cons:

• The most expensive pick in the set for the 13–43 in size class
• 33 lb weight limit rules out larger 43 in screens
• No published warranty length

2. USX MOUNT XMM006-1 — Best budget pick

The cheapest mount in this set and the one that handles the biggest screens, at up to 65 in and 77 lbs, so it wins any stationary living-room job by a wide margin.

Best for: a stationary living room with a 55 to 65 in screen. Skip it if: you plan to move the mount between two wall plates.

This is not a portable mount in the RV sense, and I would not pretend otherwise. It is a full motion wall mount with a VESA range from 75x75 mm to 400x400 mm, published capacity of 77 lbs, and a footprint of 2.81 x 17.5 x 17.5 in folded. It also comes with a 10-year warranty, the longest in the set. USX MOUNT says the arm extends to 16.7 in and swivels ±90°, with a ±5° post-installation levelling adjustment.

Within this shortlist, its role is simple: if the "portable" part of the keyword is aspirational and the TV is actually going on a permanent wall, buying the 13 to 43 in RV mounts wastes money on features you will not use. This one covers a much larger screen for less.

The trade-off is that USX MOUNT specifies wood stud or solid concrete only, and warns against drywall alone. That is standard for a 77 lb rated mount, but it does rule out plasterboard partitions and any RV wall panel that isn't over a stud.

Pros:

• Cheapest of the seven
• 77 lb TV capacity, highest in this size bracket
• 10-year warranty
• VESA 75x75 to 400x400 mm coverage
• Bubble level and full hardware kit included

Cons:

• Not portable in any real sense once installed
• Wood stud or solid concrete only, no drywall-only installs
• 5.07 lb bracket weight adds to the wall load

3. Perlegear PGLF8 — Best premium

The heaviest-duty mount here, rated by Perlegear for 42 to 90 in TVs up to 132 lbs on a 16-inch wood stud, with steel bearing joints at each pivot.

Best for: a heavy 75 to 85 in screen on a 16-inch stud wall. Skip it if: you need anything close to portable.

The PGLF8 is a UL-listed mount for a big living-room TV. Perlegear claims solid steel bearings and precision washers at every joint, ±50° swivel and 16 in of arm extension, folded down to 2.76 x 17.7 x 13.4 in. It carries a 2-year manufacturer warranty. In this set it is the only pick built for screens larger than 65 in.

I have included it because a real slice of readers searching for a "full motion" mount are shopping for a 75 or 85 in TV and confuse "moves in three axes" with "moves house". This is the mount for the first case. Its swivel is narrower than the ±90° that the RV mounts advertise, because a 90-lb TV extending 16 in from the wall introduces leverage the small brackets never see.

The trade-off is bulk. Nothing about a mount rated to 132 lbs is portable, and the footprint is roughly twice the depth of the RV picks. It also costs the most in the set. Pay for it only if the screen size actually calls for it.

Pros:

• Rated for TVs up to 132 lbs
• Covers 42 to 90 in screens
• UL-listed with steel bearing joints
• 2-year manufacturer warranty
• 16 in extension published

Cons:

• Highest price position in the set
• Fixed install, not portable
• ±50° swivel narrower than the RV mounts here

4. MOUNTUP MU2101 — Best warranty

The 3-year warranty is the longest on any lockable RV mount in this set, and the pull-cord lock is built to hold the TV still while the rig is moving.

Best for: campers who want the longest cover on a lockable mount. Skip it if: you need extended dimensions published before you buy.

MOUNTUP built this for 13 to 43 in TVs up to 33 lbs, with VESA patterns from 75x75 mm to 200x200 mm. The lock is a pull cord at the base of the arm rather than the toothed joint on the Mount-It! MI-429. That is a simpler mechanism and cheaper to make, and it locks the arm against the wall once the TV is stowed for travel. MOUNTUP claims +5°/-15° tilt, ±90° swivel and roughly 14 in of arm extension.

Where this pick wins outright is the 3-year warranty. Only the VIVO pole mount matches it, and none of the other RV-specific picks publish anything longer. In a category where the mount is going to see rough-road vibration for years, warranty length is a real number to compare.

The trade-off is documentation. MOUNTUP does not publish a folded dimension figure or a bracket weight, so you cannot pre-check clearance behind a slide-out or a cabinet before the box arrives. Only one seller lists it, which slightly narrows the fulfilment options too.

Pros:

• 3-year warranty on a lockable RV mount
• Pull-cord lock for travel
• ±90° swivel claim
• VESA 75x75 to 200x200 mm coverage
• Same 33 lb capacity as the Mount-It! winner

Cons:

• No folded dimensions or bracket weight in the listing
• Only one seller stocks it
• Single wall plate, so no quick-swap indoor/outdoor use

5. VIVO MOUNT-POLE01A — Best upgrade

A pole clamp rather than a wall bracket, which is the right choice when you are building around a van's B-pillar, a cabin post or a factory desk pole.

Best for: van builds and cabins where you already have a vertical pole. Skip it if: you have no pole to clamp to and no plan to add one.

VIVO's pole mount fits any pole between 1.1 in and 2.4 in in diameter, and takes 17 to 32 in screens up to 17.6 lbs with VESA 75x75 mm or 100x100 mm. The pole is not included, which is the part most buyers miss on the listing. VIVO claims +30°/-30° tilt, 180° swivel and 360° rotation, which is a wider tilt range than any of the wall mounts here publish.

The reason it belongs in a portable full motion TV mount roundup is the install path. A pole is the easiest mounting surface to add and remove in a rental, in a van build, or on a workshop bench. Loosen two clamp bolts and the entire assembly lifts off. It is genuinely portable in a way the wall mounts are not.

The trade-off is screen size. Above 32 in and 17.6 lbs, it is out. This is a small-screen solution and a genuine upgrade over a wall bracket only if the pole install fits the space.

Pros:

• Clamps to poles 1.1 to 2.4 in diameter
• +30°/-30° tilt and 360° rotation claimed
• 3-year warranty
• Removable VESA plate for install
• No wall damage on removal

Cons:

• Pole not included
• 32 in and 17.6 lb ceiling
• VESA capped at 100x100 mm

6. Perlegear PGLRVF2 — Best minimal setup

The lightest mount in the set at 3.88 lb, with a published capacity 11 lbs higher than the other 13 to 43 in RV picks.

Best for: a small trailer where every pound of hardware counts. Skip it if: your TV weighs more than 44 lbs.

Perlegear's PGLRVF2 covers 13 to 43 in TVs up to 44 lbs, with VESA patterns from 75x75 mm through 200x200 mm. Perlegear claims 18.97 in of arm extension, ±90° swivel and +5°/-15° tilt, along with a pull-cord lock for travel. The whole assembly folds to 2.4 x 11.1 x 9.65 in and weighs 3.88 lb.

The pitch here is simple. If you are outfitting a small camper and every fixture is a compromise between capability and load, this mount publishes both the lowest weight and the highest capacity in the 13 to 43 in bracket of this set. That combination is unusual, and it is what earns the minimal-setup nod.

The trade-off is warranty and channel: Perlegear does not publish a warranty length on this specific listing, and only one seller stocks it. Against the Mount-It! MI-429, it also lacks a second wall plate, so it is minimal in the sense of light, not minimal in the sense of quick-swap.

Pros:

• 3.88 lb bracket weight, lightest in the set
• 44 lb TV capacity in the small-screen class
• 18.97 in extension claim
• Pull-cord travel lock
• Steel construction

Cons:

• No warranty length published
• Only one seller lists it
• Single wall plate, no swap-out design

7. Mount-It! MI-4151 — Best for pros

Installs to a single wood stud, with a quick-release VESA plate and an anti-theft lock — the mount to reach for in a corner, a garage or a semi-truck cab.

Best for: single-stud installs in corners, garages or semi-truck cabs. Skip it if: your screen is 43 in or larger.

Mount-It!'s MI-4151 is a 13 to 42 in mount rated for 44 lbs, covering VESA 75 through 200 mm. Mount-It! claims 18 in of extension, ±15° tilt, 180° swivel and 360° rotation, with the arm folding to 3.5 x 11.3 x 9.3 in. Two features earn its place: the single-stud install, and the anti-theft lock on the quick-release plate.

Single-stud is what makes this the pro pick. Most full motion mounts want two studs at 16-in centres, which is fine on a living-room wall and impossible in a corner, next to a window frame, or in a truck cab where framing does not follow standard spacing. Mount-It! says it is strength-tested to three times its rated capacity, which is a manufacturer claim rather than an independent number, but the single-stud pattern is real.

The trade-off is that this mount is not designed as a swap-out portable. It goes in one place with the anti-theft plate, and it stays there. Screen size caps at 42 in.

Pros:

• Single-stud install path
• Anti-theft lock on quick-release plate
• 18 in arm extension claim
• 44 lb capacity
• Fits corners and non-standard framing

Cons:

• 13 to 42 in screens only
• No published warranty length
• Not intended as a swap-out portable mount

Locking mechanisms: toothed arm vs pull cord

Three of these mounts are sold specifically for RV use, and each uses a different way of stopping the TV moving on a rough road. It matters more than the swivel figure on the box.

• Toothed locking arm (Mount-It! MI-429). Every articulation point clicks into a fixed detent. The arm cannot rotate under vibration because it is mechanically indexed, not held by friction.
• Pull-cord lock (MOUNTUP MU2101, Perlegear PGLRVF2). A cord at the base of the arm engages a latch when the mount is folded flat. Simpler, cheaper, and locks the arm against the wall rather than at each joint.
• No travel lock (USX MOUNT, Perlegear PGLF8, VIVO, Mount-It! MI-4151). These are stationary mounts and were never designed to be driven around. Adding an aftermarket strap is your job.

If the mount is going into a vehicle, buy from the first two categories. If it is going on a house wall, the lock is irrelevant and the money is better spent on capacity.

VESA and weight: match your TV before you buy

VESA is the four-hole bolt pattern on the back of the TV, measured in millimetres. The number pairs in this roundup range from 75x75 mm on the smallest picks up to 400x400 mm on the USX MOUNT. Weight capacity is the second number, and it is not related to the size figure printed on the listing.

A 43 in TV can weigh anything from 15 lbs to 40 lbs depending on the panel and the stand. A 65 in TV can weigh 45 lbs or 75 lbs. The listing size range is a rough guide, but the VESA pattern and the pounds figure are the two numbers you must match.

1. Find the VESA pattern on the manual or the back of the TV.
2. Weigh the TV, without the stand, on a bathroom scale.
3. Check both numbers fit inside the mount's published range.

Get either wrong and even a UL-listed mount will not save the screen.

Installation surfaces you can and cannot use

Every wall mount here specifies wood studs or solid material. None of them are rated for drywall alone, plasterboard alone, or thin RV wall panels without backing. That is not a shipping detail: it is a load-bearing requirement.

• Wood stud, 16 in centres. Works with everything, including the Perlegear PGLF8 for large screens.
• Single wood stud. Only the Mount-It! MI-4151 is designed for this by default.
• RV or camper interior wall. Locate the framing member behind the panel first. If the panel has no framing, add a plywood backing plate before installing any mount.
• Solid concrete or brick. USX MOUNT and Perlegear PGLF8 support this with appropriate anchors, sold separately.
• Vertical pole, 1.1 to 2.4 in diameter. VIVO MOUNT-POLE01A only.

Never install into drywall alone, even for the lightest mount in the set.

Which pick fits your rig?

Use this quick map before you click through.

• Class A or fifth wheel with an outdoor entertainment bay: Mount-It! MI-429, for the dual wall plates.
• Travel trailer, single interior wall: MOUNTUP MU2101 for the warranty, or Perlegear PGLRVF2 for the lightest weight.
• Van build with a vertical pole: VIVO MOUNT-POLE01A.
• Sticks-and-bricks living room, 55 to 65 in TV: USX MOUNT XMM006-1.
• Sticks-and-bricks living room, 75 in and up: Perlegear PGLF8.
• Corner install, garage, or semi-truck sleeper: Mount-It! MI-4151.

Where two picks share a profile, pick the one whose weight limit gives you the most headroom over your actual TV weight.

The verdict

For most people typing "best portable full motion TV mount" into Amazon, the winner is the Mount-It! MI-429. It is the only mount in this set that ships with two wall plates and a quick-release bracket, which is what "portable" means in the RV context that dominates the query. The toothed locking arm holds a 33 lb screen still on a rough road at every joint, not just at the base, and the 15.3-inch extension gives you enough reach to swing a 40 in TV clear of a slide-out.

The cutoff is TV weight. Below 33 lbs and 43 in, the MI-429 wins. Above 33 lbs, or above 43 in, it drops out and the choice splits by use case. For a stationary 55 to 65 in living-room TV, the USX MOUNT XMM006-1 is the better buy because it costs the least in the set and comes with a 10-year warranty. For a 75 to 90 in wall install, the Perlegear PGLF8 is the only pick here rated for the load. Neither is portable in any meaningful sense, and that is the point: match the mount to how the TV is actually going to be used, not to the search phrase.

FAQ

What makes a TV mount portable rather than just full motion?

What makes a TV mount portable is dual wall plates and a quick-release bracket that lets the TV move between mounting points without unbolting the arm. Full motion means the arm tilts, swivels and rotates; portable means the assembly is designed to be moved. In this set, only the Mount-It! MI-429 ships with two wall plates from the box for indoor and outdoor viewing.

Is a lockable RV mount worth the extra cost over a standard full motion mount?

A lockable RV mount is worth the extra cost the moment the vehicle is in motion. Vibration on a rough road will loosen any friction-only joint over hours of driving, and a TV that shifts even a few degrees becomes a torque load on the arm. The Mount-It! MI-429's toothed joint and the pull-cord locks on the MOUNTUP MU2101 and Perlegear PGLRVF2 all address this problem directly.

Can these portable TV mounts install into drywall alone?

None of these portable TV mounts install into drywall alone. Every listing here specifies wood studs, solid concrete or, in the case of the VIVO, a vertical pole. Drywall on its own cannot carry the shear load of a full motion arm holding an extended TV, and no anchor system rated for the weights listed in this roundup will hold in plasterboard without a framing member behind it.

Mount-It! MI-429 or Perlegear PGLRVF2 for a small trailer?

Choose the Mount-It! MI-429 if you plan to watch outside as well as inside, because only it includes the second wall plate. Choose the Perlegear PGLRVF2 if the TV stays on one wall and you want the lightest bracket, at 3.88 lb, with an 11 lb higher TV capacity. The two mounts serve different jobs: swap-out use versus single-wall use in a weight-sensitive rig.

What VESA pattern do I need for a 32 to 43 inch TV?

Most VESA patterns for a 32 to 43 inch TV fall between 100x100 mm and 200x200 mm, but you must check the back of your specific TV before ordering. Every mount in the small-screen bracket here covers that range, with the widest coverage on the MOUNTUP MU2101 and Perlegear PGLRVF2, both of which list 75x75 mm through 200x200 mm and support up to 44 lbs.

Once you have the VESA pattern and the TV weight in front of you, the shortlist collapses quickly. RV owners with a screen under 43 in and under 33 lbs should start with the Mount-It! MI-429 and treat the second wall plate as the reason to buy it: paying for outdoor viewing you never use is cheaper than trying to add it later. Everyone else is buying a wall mount that happens to move in three axes, and the right pick becomes the one whose weight rating gives real headroom over the panel. Measure the TV, locate the studs, and order once.

Last updated: September 7, 2026. Product availability re-checked.

This page contains affiliate links. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.